Set_ Ng The Video Output; Screer, Saver Tun,Ir,G On/Off; Set_ Ng The Analog Otp_ - Philips MX3950D Owner's Manual

DVD Menu Options
Set theVideo Output according to your vdeo
connection
Stop p ayback,then fulow the steps of"Using
the Setup Menu" and select :
> _ideo Output
Set Analog Output to match your DVD home
cinema system's playback capabilty This
f_nction can also be accessed via the SURR
but-on on the remote control (or SURROUND
on the frul,t panel)
Follow the s_eps of"Using the Setup Menu"
and select:
S-Video
Select this if you have connected the DVD
system to yoHrTV using the S Video jack.
Scarf I Pr Pb Y
Select this if yo have connected the DVD
system to yorTV sing component video jacks
(SCART this fuat re is not available fur this
mode)
N0t_
Youdo not need to adjust the video ou@ut
setting i[ you ate using CVBS jack (y.llow) to
connect the DVD system to yourTY
Stereo
Select this to change channel output to s_ereo
which delvers sound frum only the two front
speal<ers and subwoofer
3D Sound
Select this to change channel output to 3D
sound which delivers surround sound Pore only
the two front speakers and subwoofur:
Multi-channel
Selectthis to enable Multi channel output
Follow the steps of"Using the Setup Menu" and
select :
_ Screen saver
Off
Select this to disable the screen saver fl_nct on
On
Select this if you wish to dim the TV screen
when disc playback is stopped or paused for
more than five minHtes This will prevent yor
display device from becoming damaged
29
pg 001 044 MX39 37 Engl 29 2/25/03, 9;58AM
3139 115 21993