Epson PowerLite 8000i User Manual page 64

To connect a video source to the projector:
1. Turn off the projector and video source if they are on.
2. If your video source uses a small, round, one-prong composite
3. For composite video, connect the yellow RCA plug on one end of
1 • Setting Up the Projector
54
(RCA) video connector, you'll need the RCA video cable that
comes with the projector. If your video source uses a large, round,
four-prong S-Video connector or a BNC type connector, you will
need to purchase the appropriate cable or use the cable that came
with your video source.
the RCA video cable to the projector's Video port. Connect the
other yellow RCA plug to the video-out port of your video source.
audio/video cable