note
If the password is longer
than 32 characters, enter it
by accessing the projector
from a web browser. This
lets you enter up to 63
characters. See page 104 for
details.
Using the Projector on a Network
100
press
. To toggle symbol settings or capital letters, highlight
Enter
the option and press
and press
.
Enter
7. When you're done making these settings, press
and press
Complete
save your settings.
Enabling Data Encryption from EasyMP
Network Projection
When using the EasyMP Network Projection software, follow these
steps to enable data encryption.
1. Click
Set options
2. Click the
General Settings
3. Select the
Encrypt communications
4. Click
.
OK
For more information, see the EasyMP Network Projection Operation
Guide.
. When you're done, highlight
Enter
, then choose
Enter
Yes
on the main screen.
tab.
checkbox.
Finish
. Choose
Esc
and press
to
Enter