Canon CANOSCAN D1230 series Service Manual page 59

CHAPTER 3
6) Remove two screws that fix the gear plate 2 on the sliding rod to remove the gear plate 2 and
spring.
1
2
3
4
q Screw
w Gear Plate 2
e Spring
r Sliding Rod
Figure 3-9
Note: When fixing the gear plate 2 on the sliding rod, use the spring to adjust the drive belt
tension.
3 - 10
COPYRIGHT © 2001 CANON INC. CANOSCAN D1230U/D2400U REV.0 MARCH 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)