Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Acer G193WL
Summary of Contents for Acer G193WL
- Page 1 Acer LCD Monitor User Guide...
- Page 2 Serial number: ___________________________________ Date of purchase: ________________________________ Place of purchase: ________________________________ Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies’ product names or trademarks are used herein for identification purposes only and belong to their respective companies.
-
Page 3: Safety Instructions
Information for your safety and comfort Safety instructions Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Special notes on LCD monitors The following are normal with the LCD monitor and do not indicate a problem. •... -
Page 4: Safe Listening
Accessibility Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to disconnect power from the equipment, be sure to unplug the power cord from the electrical outlet. Safe listening To protect your hearing, follow these instructions. -
Page 5: Product Servicing
• Do not allow anything to rest on the power cord. Do not locate this product where people will walk on the cord. • If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. -
Page 6: Additional Safety Information
We at Acer are very conscious of the environmental effects of our business and strive to identify and provide the best working procedures to reduce the environmental impact of our products. -
Page 7: Lcd Pixel Statement
LCD pixel statement The LCD unit is produced with high-precision manufacturing techniques. Nevertheless, some pixels may occasionally misfire or appear as black or red dots. This has no effect on the recorded image and does not constitute a malfunction. This product has been shipped enabled for power management: •... -
Page 8: Taking Care Of Your Vision
Taking care of your vision Long viewing hours, wearing incorrect glasses or contact lenses, glare, excessive room lighting, poorly focused screens, very small typefaces and low-contrast displays could stress your eyes. The following sections provide suggestions on how to reduce eyestrain. Eyes •... -
Page 9: Table Of Contents
15-pin color display signal cable 24-pin color display signal cable Standard timing table Installation Users controls Panel controls Using the Shortcut Menu Acer eColor Management Operation instructions Features and benefits Using the OSD Menus Picture Menu OSD Menu Setting Menu... - Page 10 Unpacking Please check that the following items are present when you unpack the box, and save the packing materials in case you need to ship or transport the monitor in the future. LCD monitor User guide Quick start guide DVI cable D-sub cable AC Power cord (Optional)
-
Page 11: Attaching The Base
Attaching the base Note: Remove the monitor and monitor base from its packaging. Carefully place the monitor face-down on a stable surface -- use a cloth to avoid scratching the screen. Attach the monitor stand arm to the base. Ensure that the base is locked onto the monitor stand arm. Note: Take care when performing the installation to avoid injuring yourself. -
Page 12: Screen Position Adjustment
Screen position adjustment To optimize the viewing position, you can adjust the monitor tilt, using both of your hands to hold the edges of the monitor. The monitor can be adjusted to 15 degrees up or 5 degrees down. Connecting the adapter and AC Power cord •... -
Page 13: Connector Pin Assignment
Display Data Channel (DDC) To make installation easier, so long as your system supports the DDC protocol, the monitor is able to plug-and-play. The DDC is a communication protocol through which the monitor automatically informs the host system about its capabilities; for example, supported resolutions and corresponding timing. - Page 14 24-pin color display signal cable PIN No. Description PIN No. Description TMDS data 2- TMDS data 2+ +5 V power TMDS data 2/4 shield DVI detect Hot-plug detection TMDS data 0- DDC clock TMDS data 0+ DDC data TMDS data 0/5 shield TMDS data 1- TMDS data 1+ TMDS clock shield...
-
Page 15: Standard Timing Table
Standard timing table Mode Resolution@Refresh Rate 640x480@60Hz 640x480@72Hz 640x480@75Hz 640x480@66.66Hz VESA 720x400@70Hz 800x600@56Hz 800x600@60Hz SVGA 800x600@72Hz 800x600@75Hz 832x624@74.55Hz 1024x768@60Hz 1024x768@70Hz 1024x768@75Hz 1152x870@75Hz VESA 1152x864@75Hz VESA 1280x720@60Hz WXGA 1280x800@60Hz WXGA+ 1440x900@60Hz... - Page 16 Installation To install the monitor on your host system, please follow the steps below: Steps Connect the video cable a Make sure both the monitor and computer are switched off. b Connect the VGA video cable to the computer. c Connect the digital cable (1) Make sure both the monitor and computer are switched off.
-
Page 17: Panel Controls
Auto Adjustment function and the monitor will automatically optimize the display position, focus, and clock of your display. Empowering Key Press this button to open the Acer eColor Management OSD and access the scenario modes. -
Page 18: Using The Shortcut Menu
Input sources that may be connected to your monitor. (Optional, only Dual-Input Model) Acer eColor Management Operation instructions 1 Press the Empowering Key to open the Acer eColor Management OSD menu and access the scenario modes. mpowering Technology User Standard... -
Page 19: Features And Benefits
Features and benefits Icon Mode type Description User mode User-defined. Settings can be fine-tuned to suit any situation. ECO mode Adjusts the settings to reduce power consumption. Standard mode Default settings. Reflects native display capability. Graphics mode Enhances colors and emphasizes fine detail. Pictures and photographs appear in vibrant colors with sharp detail. -
Page 20: Picture Menu
Picture and press the Menu button to enter the Picture menu. The following options are available in the Picture menu: Acer ecolor Management, Brightness, Contrast, H. Position, V. Position, Focus, Clock, Colour Temp, and Auto Config. <... -
Page 21: Osd Menu
OSD Menu The OSD menu is used for adjusting the OSD timeout setting. OSD Timeout 1 Press the Menu button to bring up the OSD menu. < > 2 Press the button to select OSD and press the Menu button to enter the OSD menu. -
Page 22: Information Menu
1 Press the Menu button to bring up the OSD menu. < > 2 Press the button to select Setting and press the Menu button to enter the Setting menu. The following options are available in the Setting menu: Wide Mode, DDC/CI, ACM, Input, Language, and Reset. -
Page 23: Troubleshooting
Troubleshooting Before sending your LCD monitor for servicing, please check the troubleshooting list below to see if you can self-diagnose the problem. VGA Mode Problem LED status Remedy No picture visible Blue Using the OSD menu, adjust brightness and contrast to maximum or reset to their default settings. -
Page 24: Dvi Mode (Optional)
DVI Mode (Optional) Problem LED status Remedy No picture visible Blue Using the OSD menu, adjust brightness and contrast to maximum or reset to their default settings. Check the power switch. Check if the AC power cord is properly connected to the monitor. Blinking Blue Check if the video signal cable is properly connected at the back of monitor.