Table of Contents
Advertisement
Altos RAIDWatch User Guide
Figure 9–4
4
The Create LUN Mapping window should appear in the content panel (see Figure 9–5). If you want
to map a logical drive then select the LD tab shown in Figure 9–5. If you want to map a logical
volume, select the LV tab shown in Figure 9–5.
Figure 9–5
5
List the available logical volumes or logical drives by clicking on the "All" icon in the respective
window. For example, in Figure 9–55 if the "All LD" icon is clicked, all available LDs will be shown
(see Figure 9–6).
Figure 9–6
6
Click on the LD (or LV) you would like to map. All the LD (LV) partitions should appear. If you wish
to map the entire
that will appear is Partition 0 (see Figure 9–7).
Figure 9–7
124
Select ADD then LUN
Create LUN Mapping
LD List
LD
LV
(or
), the LD (or
LD Partition 0
LV
) should not have been partitioned and the only partition
Advertisement
Table of Contents
