HP D7171A - NetServer - LPr Upgrade Manual page 17

200 mhz/1 mb processor board

Hide thumbs Also See for D7171A - NetServer - LPr:

Table of Contents

Chapter 3

Figure 3-6. Processor and Terminator Boards on the System Board

2. Using a Phillips head screwdriver, unscrew the two mounting screws that

secure the terminator board in place.

3. Grasp the board you are removing, and lift firmly. Place it on the

antistatic mat.

4. If you are installing more than one 200 MHz/1MB processor board,

remove additional terminator boards as necessary.

Perform the Upgrade

Table of Contents