Connecting the monitors
NOTE:
Your graphics card may support two or four monitors. Refer to the graphics card documentation
for details.
1.
Connect the monitor cable adapters (1) to the workstation, then connect the appropriate monitor
cables to the adapters (2) (if required) as shown in the following figure.
Figure 3-8
2.
Connect the other ends of the graphics cables to the monitors as shown below.
Figure 3-9
3.
Connect one end of the monitor power cord to the monitor and the other end to a grounded power
outlet.
Configuring the monitors using Microsoft® operating systems
Refer to Microsoft Help information or the Microsoft Web site for details about monitor configuration
procedures.
26
Chapter 3 Setting up the workstation
Connecting the cables to the workstation
Connecting cables to the monitors
ENWW