Audio Settings; Digital Output; Digital Output Selection - Samsung BD-F5100 User Manual

Resolution
Lets you set the output resolution of the HDMI
video signal to Auto, 1080p, 1080i, 720p or
480p. The number indicates the number of
lines of video per frame. The i and p indicate
interlaced and progressive scan, respectively.
The more lines, the higher the quality.
Resolution according to the output
mode
• Blu-ray disc/E-contents/digital Contents
playback
HDMI / connected
HDMI Mode
Output
E-contents/
Setup
Blu-ray Disc Digital
contents
Resolution of
BD Wise 1080p
Blu-ray Disc
Max. Resolution Max. Resolution
Auto
of TV input of TV input
1080p@60F
1080@60F 1080@60F
(Movie Frame : Off)
Movie Frame :
1080@24F 1080p@24F
Auto (24Fs)
1080i 1080i 1080i
720p 720p 720p
480p 480p 480p
• dVd playback
Output HDMI / connected
Setup HDMI Mode
BD Wise 480i
Auto Max. Resolution of TV input
1080p 1080p
1080i 1080i
720p 720p
480p 480p
10
NOTES
✎
` If the TV you connected to the player does not
support Movie Frame or the resolution you
selected, the message "If no pictures are shown
after selecting 'Yes', please wait for 15 seconds
to return to the previous resolution. Do you
want to change the resolution?" appears. If you
select Yes, the TV's screen will go blank for 15
seconds, and then the resolution will revert to
the previous resolution automatically.
` If the screen stays blank after you have
changed the resolution, remove all discs,
and then press and hold the @ button on the
front of the player for more than 5 seconds.
All settings are restored to the factory default.
Follow the steps on the previous page to
access each mode and select the Display Setup
that your TV will support.
` When the factory default settings are restored,
all stored user BD data is deleted.
` The Blu-ray Disc must have the 24 frame feature
for the player to use the Movie Frame (24Fs) mode.
movie Frame (24Fs)
Setting the Movie Frame (24Fs) feature to
Auto allows you to adjust the player's HDMI
output to 24 frames per second for improved
picture quality.
You can enjoy the Movie Frame (24Fs) feature
only on a TV supporting this frame rate.
You can select Movie Frame only when the
player is in the HDMI 1080i or 1080p output
resolution modes.
HdmI Color Format
Lets you set the color space format for
HDMI output to match the capabilities of the
connected device (TV, monitor, etc).
HdmI deep Color
Lets you output video from the HDMI OUT jack with
Deep Color. Deep Color provides more accurate
color reproduction with greater color depth.
progressive mode
Lets you improve picture quality when viewing DVDs.

digital Output

Lets you select the digital audio output format that is suitable for your TV or AV Receiver. For
more details, please refer to the Digital Output Selection table below.

digital Output Selection

Setup PCM
HDMI
Connection Coaxial
Receiver
PCM Up to 7.1ch PCM 2ch
Dolby Digital PCM 2ch PCM 2ch
Dolby Digital Plus PCM 2ch PCM 2ch
Audio Stream
Dolby TrueHD PCM 2ch PCM 2ch Dolby TrueHD Dolby Digital
on Blu-ray
Disc
DTS PCM 2ch PCM 2ch
DTS-HD High
PCM 2ch PCM 2ch
Resolution Audio
DTS-HD Master
PCM 2ch PCM 2ch
Audio
PCM PCM 2ch PCM 2ch
Audio Stream
Dolby Digital PCM 2ch PCM 2ch
on DVD
DTS PCM 2ch PCM 2ch
Decodes main feature
audio and BONUSVIEW
Definition for
Any audio stream together
Blu-ray Disc
into PCM audio and add
Navigation Sound Effects.

Audio Settings

Bitstream
Bitstream
(Re-encoded
(Unprocessed)
DTS)
HDMI HDMI Receiver or
Coaxial
Receiver Coaxial
PCM PCM 2ch Re-encoded DTS
Dolby Digital Dolby Digital Re-encoded DTS
Dolby Digital
Dolby Digital Re-encoded DTS
Plus
Re-encoded DTS
DTS DTS Re-encoded DTS
DTS-HD High
Resolution DTS Re-encoded DTS
Audio
DTS-HD
DTS Re-encoded DTS
Master Audio
PCM 2ch PCM 2ch PCM 2ch
Dolby Digital Dolby Digital Dolby Digital
DTS DTS DTS
Decodes main feature
Outputs only main feature audio and BONUSVIEW
audio stream together
audio stream so that your
AV receiver can decode the into PCM audio
audio bitstream. and add Navigation
You will not hear BONUSVIEW Sound Effects, then
audio and Navigation Sound re-encodes the
Effects. PCM audio into DTS
bitstream
Bitstream
(Re-encoded
Dolby D)
HDMI supported
AV receiver or
Coaxial
Re-encoded
Dolby Digital *
Re-encoded
Dolby Digital *
Re-encoded
Dolby Digital *
Re-encoded
Dolby Digital *
Re-encoded
Dolby Digital *
Re-encoded
Dolby Digital *
Re-encoded
Dolby Digital *
PCM 2ch
Dolby Digital
DTS
Decodes main
feature audio and
BONUSVIEW audio
stream together into
PCM audio and add
Navigation Sound
Effects, then re-
encodes the PCM
audio into Dolby
Digital bitstream