HP Vectra VEi7 Installation Manual
Hp vectra vei7, olicom oc-3137 token ring 16/4 pci adapter, installation guide
Hide thumbs
Also See for Vectra VEi7:
- Supplementary manual (80 pages) ,
- User manual (70 pages) ,
- Technical reference manual (54 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for HP Vectra VEi7
Summary of Contents for HP Vectra VEi7
- Page 1 Olicom OC-3137 Token Ring 16/4 PCI Adapter Installation Guide...
- Page 2 Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
- Page 3 General information to read before installing General information to read before installing On all systems: efore installing LAN card, go into Bios setup and set PnP OS field to NO. • How to change LAN card configuration if needed (Advanced users only) This is a general advisory on how to forcibly modify resources for ISA and PCI network cards.
- Page 4 General information to read before installing 2 Press F2 to go to CMOS setup. 3 Set PNP OS to NO and reserve IRQ 5. 4 Save settings and boot to applicable OS.
- Page 5 • Microsoft Windows 95 SR2.5 media. • Microsoft Windows NT 3.51 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1000 DCC0 E400...
- Page 6 • Microsoft Windows 95 SR2.5 media. • Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1000 DCC0...
- Page 7 • Microsoft Windows 95 SR2.5 media. • Novell NetWare 3.12 Server system that supports IPX network protocol. • Novell Client for Windows 95 v2.5 installation media. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1000 DCC0...
- Page 8 3 Installing the Olicom OC-3137 Token Ring 16/4 PCI Adapter Connecting to a Novell NetWare 3.12 Server 10 Click on “Yes” to accept the License Agreement. 11 Select “Custom” installation and click on “Next”. 12 Select “Bindery (NetWare 3.x)” and click on “Next”. 13 Click on “Install”...
- Page 9 • Microsoft Windows 95 SR2.5 media. • Novell NetWare 4.11 Server system that supports IPX network protocol. • Novell Client for Windows 95 v2.5 installation media. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1000 DCC0...
- Page 10 4 Installing the Olicom OC-3137 Token Ring 16/4 PCI Adapter Connecting to a Novell NetWare 4.11 Server 10 Click on “Yes” to accept the License Agreement. 11 Select “Custom” installation and click on “Next”. 12 Select “NDIS (NetWare 4.x or higher)” and click on “Next”. 13 Click on “Install”...
- Page 11 • Microsoft Windows NT 4.0 Service Pack 4 media. • Microsoft Windows NT 3.51 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1000 DCC0 E400...
- Page 12 17 After “Network has been installed on this computer” click on “Finish”. 18 Install the Windows NT4 Service Pack 4 application to correct the error messages in the Event Viewer. 19 Install the Hewlett-Packard Soft-Power Down application once the Service Pack 4 has been installed.
- Page 13 • Microsoft Windows NT 4.0 Service Pack 4 media. • Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1000 DCC0...
- Page 14 17 After “Network has been installed on this computer” click on “Finish”. 18 Install the Windows NT4 Service Pack 4 application to correct the error messages in the Event Viewer. 19 Install the Hewlett-Packard Soft-Power Down application once the Service Pack 4 has been installed.
- Page 15 • Microsoft Windows NT 4.0 Service Pack 4 media. • Novell NetWare 3.12 Server system that supports IPX network protocol. • Novell IntranetWare Client for Windows NT v4.11b installation media. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1000 DCC0...
- Page 16 24 Click on the “Login” tab and specify your Name and Password to login. 25 Install the Windows NT4 Service Pack 4 application to correct the error messages in the Event Viewer. 26 Install the Hewlett-Packard Soft Power Down application once the Service Pack 4 has been installed.
- Page 17 • Microsoft Windows NT 4.0 Service Pack 4 media. • Novell NetWare 4.11 Server system that supports IPX network protocol. • Novell IntranetWare Client for Windows NT v4.11b installation media. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1000 DCC0...
- Page 18 25 Click on the “Login” tab and specify your Name and Password to login. 26 Install the Windows NT4 Service Pack 4 application to correct the error messages in the Event Viewer. 27 Install the Hewlett-Packard Soft Power Down application once the Service Pack 4 has been installed.
- Page 19 • Microsoft Windows NT 3.51 Service Pack 5 media. • Microsoft Windows NT 3.51 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1000 DCC0 E400...
- Page 20 9 Installing the Olicom OC-3137 Token Ring 16/4 PCI Adapter Connecting to a Windows NT 3.51 Server 9 Click on the “Do Not Detect” button from the “Network Adapter Card Detection” dialog box, and click on “Continue” in the second “Network Adapter Card Detection”...
- Page 21 • Microsoft Windows NT 3.51 Service Pack 5 media. • Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1000 DCC0...
- Page 22 10 Installing the Olicom OC-3137 Token Ring 16/4 PCI Adapter Connecting to a Windows NT 4.0 Server 9 Click on the “Do Not Detect” button from the “Network Adapter Card Detection” dialog box, and click on “Continue” in the second “Network Adapter Card Detection”...
- Page 23 • Microsoft Windows NT 3.51 Service Pack 5 media. • Novell NetWare 4.11 Server system that supports IPX network protocol. • Novell IntranetWare Client for Windows NT v4.11b installation media. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1000 DCC0...
- Page 24 11 Installing the Olicom OC-3137 Token Ring 16/4 PCI Adapter Connecting to a Novell NetWare 4.11 Server 8 In the “Windows NT Setup” enter the path to your NT files, and click on the “Continue” button. 9 Click on the “Do Not Detect” button from the “Network Adapter Card Detection”...
- Page 25 • Microsoft Windows for Workgroups 3.11 media. • Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1000 DC00...
- Page 26 12 Installing the Olicom OC-3137 Token Ring 16/4 PCI Adapter Connecting to a Microsoft Windows NT 4.0 Server 10 At the “Network Drivers” window, click on “Close”. 11 At “Network Setup” click on “OK”. 12 Specify your User Name, Workgroup Name, and Computer Name and hit Enter.
- Page 27 • Microsoft Windows for Workgroups 3.11 media. • Novell NetWare 4.11 Server system that supports IPX network protocol. • NetWare Client for DOS and MS Windows v1.21 installation media. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1000 DC00...
- Page 28 13 Installing the Olicom OC-3137 16/4 Token Ring PCI Adapter Connecting to a Novell NetWare 4.11 Server 10 Select option 6 “Highlight here and press <Enter> to install” and press “Enter” to begin installation. 11 When the installation is finished, remove the Olicom driver disk from the floppy drive and press <CTR><ALT><DEL>...