Yamaha 02R96 Version 2 Owner's Manual page 13

Remote Channels
When you select the REMOTE LAYER button in the Master window, Remote Chan-
nels are displayed.
A
Channel number
This is the channel number. Double-click the channel number to open the
Selected Channel window.
B
[SELECT] button
This button is used to select the Remote Channel.
C
[ON] button
This button turns the Remote Channel on and off. It appears orange while the
channel is on.
Note: When the remote target setting on the 02R96 is set to User Defined, you can
use the [ON] buttons and channel faders to control the functions specified on the
Remote page.
D
Remote target name
This name indicates the remote target assigned on the 02R96.
A
E
Channel fader
This is the Bus Out's fader.
Note: When the remote target setting on the 02R96 is set to User Defined, you can
use the [ON] buttons and channel faders to control the functions specified on the
Remote page.
F
Fader value indicator
This indicator indicates the fader position in the range of 0 through 127.
If the remote target is set to User Assignable Layer:
B
In this case, the assigned channels are displayed. For more information, refer to
C
"Input Channels" on
D
ter Fader is assigned, only the [AUTO], [SOLO], and [ON] buttons and channel fad-
ers are displayed.
E
F
page 10 and "Output Channels" on
Studio Manager for V2 02R96 Editor—Owner's Manual
page 12. If the Group Mas-
13