Power Lamp And Alarm Lamp Flash Alternately - Canon iP6220D - PIXMA Color Inkjet Printer Direct Printing Manual

Adjusting the Print Head Manually
If the automatic print head adjustment does not work or if you wish to adjust
the print heads manually, follow the procedure below.
1. With the printer on, load a sheet of A4/Letter-sized plain paper in
2. Press the Menu
3. Use the
4. Use the
5. Use the
6. When the confirmation message is displayed, use the
7. The message of "Did the patterns print correctly?

POWER Lamp and Alarm Lamp Flash Alternately

Possible Cause
An error that requires contacting the
Customer Care Center may have occurred
60
the auto sheet feeder.
Menu button. Menu Menu
buttons to select Maintenance/settings
the OK OK button.
OK OK
buttons to select Maintenance
button.
buttons to select Manual head align
button.
select Yes Yes and then press the OK
Yes Yes
The print head alignment pattern will be printed.
Did the patterns print correctly?" is displayed on Did the patterns print correctly? Did the patterns print correctly?
the LCD.
Ensure that the patterns were printed normally and use the
to select Yes Yes and then press the OK Yes Yes
8. Examine the printed pattern and enter the number of
column "A" with fewest white stripes using the
buttons.
9. Use the
and then enter the number of column "B" with fewest
white stripes using the
10. Repeat the same procedure and enter the pattern
numbers up to column "N".
11. After entering the number of all columns, press the OK
button.
Disconnect the printer cable from the printer, and then turn the printer off and unplug
the printer from the power supply. Plug the printer back in and turn the printer back on
after leaving it for a while.
If the problem remains, contact the Customer Care Center.
Maintenance/settings Maintenance/settings Maintenance/settings and then press
Maintenance and then press the OK
Maintenance Maintenance
Manual head align and then press the OK Manual head align Manual head align
OK button.
OK OK
OK OK OK button.
button to move the cursor to column "B"
buttons.
Try This
OK
OK OK
OK OK OK
buttons to
buttons
OK
OK OK