Mount Existing Storage Volumes (Template) - HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure Command Reference Manual

Mount existing storage volumes (template)

Template summary
A. Creates a host volume by presenting an existing* storage volume to an enabled host.
B. Mounts the host volume.
C.
Pauses the job until continued by a user.
D.
After continuing, unmounts and deletes the host volume.
* A storage volume that is created by means other than this job. The volume must exist and be in the
replication manager database when this job is run.
Template options
• Number of volumes to replicate. Adds commands for each volume.
• Launch backup after replication. Adds a launch command for interacting with an enabled host,
for example, to start a tape backup.
• Include e-mail notification. Adds a command for e-mail notification of the job instance status.
See SetNotificationPolicy.
Comments
• This template cannot be used with HP-UX host volumes.
• When used with Tru64 UNIX hosts, this template supports only UFS file systems.
Example
This template was generated to mount one existing storage volume on a host. No other template
options were selected.
HP StorageWorks Replication Solutions Manager 4.0.1
41