Switching The Sound Muting/Attenuation; Switching The Automatic Disc Playback; Switching The Dimmer Setting For Sub-Display; Changing The Voice Output Of The Navigation Guidance - Pioneer AVIC N2 - Navigation System With DVD player Operation Manual

1
Touch "REAR SP" in the INITIAL menu.
2
Touch "REAR SP" to switch the rear out-
put setting.
When no subwoofer is connected to the rear
output, select FULL.
When a subwoofer is connected to the rear
output, select SUB. W.
❒ When the rear output setting is SUB. W,
you cannot change the subwoofer control-
ler.
3
Touch "PREOUT" to switch the sub-
woofer output or non fading output.
❒ Even if you change this setting, there is no
output unless you turn "NON FADING" or
"SUB WOOFER" in the AUDIO menu
"ON".
➲ Using non fading output ➞ Page 91
➲ Using subwoofer output ➞ Page 91
❒ If you change the subwoofer controller
(REAR SP), the subwoofer output (SUB
WOOFER) and non fading output (NON
FADING) in the AUDIO menu return to
the factory settings.
❒ Both rear speaker leads output and RCA
rear output are switched simultaneously in
this setting.
Switching the sound muting/
attenuation
Sound from this system is muted, attenuated or
mixed automatically in the following cases:
• When a call is made or received using a cellu-
lar telephone connected to navigation unit.
• When the voice guidance is output.
1
Touch "TEL/GUIDE" in the INITIAL
menu.
Each touch of the "TEL/GUIDE" changes the
settings as follows:
• MUTE— Muting
• ATT — Attenuation
• NORMAL — Volume does not change
❒ The sound is turned off, no audio adjust-
ment is possible.
❒ When a phone connection is made,
MUTE or ATT is indicated.
❒ Operation returns to normal when the
phone connection or the voice guidance is
ended.
❒ Even when you receive a phone call, navi-
gation voice guidance cannot be attenu-
ated or muted. Use the Hardware
Volume to control the navigation voice
guidance volume.
Switching the automatic disc
playback
You can turn automatic disc playback on or off
when you insert a disc into the disc loading slot.
When this function is on, the disc will be auto-
matically played after it is inserted into the disc
loading slot.
Initially, this function is set to OFF.
1
Touch "DISC AUTO" in the INITIAL
menu.
Touching "DISC AUTO" switches between
"ON" and "OFF".
Switching the dimmer setting
for sub-display
To prevent the sub-display from being too bright
at night, the sub-display is automatically dimmed
when the vehicle's headlights are turned on. You
can turn dimmer on or off.
1
Touch "SUB. D. DIM" in the INITIAL
menu.
Touching "SUB. D. DIM" switches between
"ON" and "OFF".
❒ Initially, this function is set to OFF.
Changing the voice output of the
navigation guidance
When there is a navigation guidance, you can
mix the guidance voice/beep sound from a navi-
gation with the audio sound from this system.
You can select the speaker output the navigation
guidance.
1
Touch "GUIDE VOICE" in the INITIAL
menu.
Each touch of the "GUIDE VOICE" changes
the settings as follows:
95