Ip Configuration Commands; Arp - Dell 8 Command Reference Manual

IP Configuration Commands

arp

Configures a static ARP connection.
Synopsis arp ip-address hardware-address
no arp ip-address
Operands ip-address
hardware-address
no arp
Description Use this command to define a static ARP connection between an IP address to a local data link
address.
Defaults There are no default configurations for this command.
Command Global configuration mode
Modes
User Guidelines There are no usage guidelines for this command.
Example none
See Also none
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
IP address in four-part dotted decimal format corresponding to the local
data-link address.
Local data-link address (a 48-bit address).
Cancels the connection for the specified address.
Chapter
5
75