Canon VB-C300 Administrator's Manual page 131

Step 4: Set the Detection Regions (VB-C500VD/VB-C500D/VB-C60)
1. If you want to partition the detection region for notifications, check area the [Notice events with the area
name when motions are detected] checkbox.
2. Check the [Record on this area] checkbox on the recording settings tab.
Tip
This operation is not necessary if you want configure the recording settings over the entire region without
partitioning the detection regions.
Step 5: Set the event priority status
In the [Priority] field, select the priority for the event to be generated for this motion from a menu of five options,
ranging from [1. Highest] to [5. Lowest]. Priorities are color-coded in the Timeline in the Viewing Screen.
Tip
When the same priority level is set to multiple detection areas, the schedule is executed in the order of Area
1, 2, 3 and 4.
Set Motion Detection Recording
4-51