HP AK373A - StorageWorks All-in-One Storage System 1200r 5.4TB SAS Model NAS Server Release Notes page 5

Installation of All-in-One Version 1.4.0
This section describes issues related to upgrading to All-in-One Version 1.40.
Issue: Some settings may be lost when upgrading to All–in–One version 1.4.0
Description
Workaround
System Administration
This section describes issues related to system administration of the All-in-One Storage Systems.
Issue:
Virtual tapes may be lost when connecting to the All-in-One Storage Server
Description
Workaround
All-in-One Storage Manager
This section describes issues related to HP StorageWorks All-in-One Storage Manager (ASM) running on
All-in-One Storage Systems.
Exchange, SQL Server, and user-defined application data restored to an alternate location cannot
Issue:
be deleted
Installation of All-in-One Version 1.4.0
The following settings may be lost while upgrading to All-in-One version 1.4.0 if
the All-in-One Storage Manager is unable to communicate with all of its agents
when Finalize Installation is clicked:
• Snapshot schedules get set to None
• Lists of snapshots are deleted
User defined application names change to the volume name on the application
•
server
• Shares no longer have a size limit
1.
Make sure all All-in-One Storage Manager Agents have been updated to the
same version of the All-in-One Storage Manager Agent as the version of
All-in-One Storage Manager that is on the All-in-One Storage System.
2.
Make sure that All-in-One Storage Manager has the necessary credentials for
each application on each application server:
a.
In the All-in-One Storage Manager Actions pane, select Application
Credentials.
b.
If any applications do not have correct credentials, update the credentials
by clicking the Update Credentials button.
3. Run the following command from a Command Prompt: "C:\Program
Files\HP\HP All-in-One Storage Manager\hpkacli.exe"
force upgrade
System Administration
Connecting the All-in-Storage Server to a VLS1000i tape device using the Microsoft
iSCSI initiator may result in the virtual tapes disappearing from the system every
hour.
Install a hardware initiator on the All-in-One Storage Server and configure the
VLS1000i virtual tape device to use the hardware initiator. Refer to the installation
instructions included in the hardware initiator.
All-in-One Storage Manager
All-in-One Storage System
5