Calibration Screen - Motorola MC3090G - Win CE 5.0 Core User Manual

1 - 10 MC3000 User Guide
After the calibration procedure is performed the factory settings launch the Demo window. Application specific
shells may provide application specific windows instead of the Demo window. These screens also appear when a
cold boot is performed.
If the mobile computer does not power on, see

Calibration Screen

Use the Calibration screen to align the touch screen:
Remove the stylus from the stylus holder.
1.
Carefully press and briefly hold the stylus tip on the center of the Calibration screen target. Repeat the
2.
procedure as the target moves and stops at different locations on the screen. This enters the new calibration
settings.
Calibration Screen
Calibration Screen
Figure 1-8
Once all of the new calibration settings are input, tap the screen or press the ENTER button to save the new
3.
calibration settings. Press ESC to discard the new calibration settings.
Demo Window
The Demo window is the factory default menu. On initial power up (or on a warm or cold boot) the Demo window
appears. These sample/demo applications are intended to be used by application developers as application
development examples. These applications were not developed to support end users. Refer to the Symbol
Application Guide for information about the Demo window applications.
Demo Window
Figure 1-9
Resetting the Mobile Computer on page
Confirm Calibration
Resave Screen
2-28.