Page 1
Group Q ingd ao Eco nomi c & Te chnic al Dev elopm ent Z one H aier Water Heate r Co.,L td. Add: Haier Industry Park, Qingdao Economic & Technical Development Zone,Qingdao, China Please read this manual before usage Rev.
Page 2
After installation, be sure to fill the tank with water before switching on the power. The receptacle of water heater shall be set to places beyond the water Contents spraying. Never plug or pull the power plug with wet hand. If the power cord is damaged, be sure to have it replaced by appointed maintenance.
Page 3
.You can The international star service of Haier Group will always accompany you. urn the handle of the mixing valve upward to the left then pull the handle of...
When the power is switched on, and the water heater starts operating, there may weight C Mg anode rod be some water discharged from the pressure relief hole of safety valve. It is due to D Heating element FCD-8 325mm 414 mm 100mm 25 5mm the water expansion under heating, and is normal phenomenon.