Operating Your Navigation System With; To Ensure Safe Driving; Basics Of Voice Operation; Flow Of Voice Operation - Pioneer AVIC Z3 - Navigation System With DVD player Operation Manual

Chapter
18 Operating Your Navigation System with Voice

To Ensure Safe Driving

CAUTION
For safety reasons, Voice Help menu (Voice Reco-
g.Help) is not available while your vehicle is in
motion. To enable this function, you must stop in
a safe place and put on the parking brake before
setting your route.
Depending on the selected languages, the
commands that you registered before may not
be available.
= For details, refer to Available Voice Com-
mands on page 159

Basics of Voice Operation

Your Pioneer navigation system uses the latest
in voice recognition technology. You can use
voice commands to operate many of its func-
tions. This chapter describes where you can
use voice commands, and also what com-
mands the system accepts.

Flow of voice operation

You can start voice operation any time even
when the map screen is displayed or audio is
operated. (Some operations are not available.)
The basic steps of voice operation are as fol-
lows.
1 Touch VOICE icon to activate voice op-
eration.
2 Speak a command into the microphone
after the beep.
156
En
3 When the command is recognized, the
navigation system displays the response
message on the screen, and pronounces it
in some cases.
4 As necessary, repeat Step 3.
5 The requested operation will be carried
out.
p The voice operation may not be operable for a
minute after the navigation system has booted
up.
p If you operate using "CD-SR1" Steering Re-
mote Control (sold separately), the following
buttons can be used for operation:
VR ACTIVATION / OFF HOOK button:
Same function as VOICE icon.
VR CANCEL / ON HOOK button:
Return to previous screen.

To start voice operation

No sounds can be output during
% Touch VOICE icon.
Navigation screen
Audio screen
.