Acse/Presentation Primitives - HP A4500A - VMEbus Single Board Computer 744 Motherboard Programmer's Manual

Supported ACSE/Presentation and ROSE Calls
ACSE/Presentation Calls and Primitives
ap_rcv()
ap_set_env()
ap_snd()

ACSE/Presentation Primitives

The following table lists the supported ACSE/Presentation layer service
primitives. These primitives are used with the ap_rcv() and ap_snd()
calls as described below.
Some of the primitives contain a shorter name in BOLD under the
primitive's name. On systems that support a maximum length of 14
characters for file names, use the name listed in bold with the MAN
feature. Primitives with no short name can be used on all systems.
The primitives are grouped in the sequence used in an application. For
example, the A_ASSOC_xxx primitives are listed in the order:
A_ASSOC_REQ (request)
A_ASSOC_IND (indication)
A_ASSOC_RSP (response)
A_ASSOC_CNF (confirmation)
Table 2-2 ASCE/Presentation Primitives
Primitives
A_ABORT_REQ
A_ABORT_IND
A_ASSOC_REQ
24
A/P Call
Used with ap_snd() to request the abnormal release
of an association.
Used with ap_rcv() to indicate the abnormal release
of an association.
Used with ap_snd() to initiate establishing an
association.
Description
Receive an A/P primitive over an
association. User data may be
associated with the primitive.
Set an attribute in the A/P
environment.
Send an A/P primitive over an
association. User data may be
associated with the primitive.
Description
Chapter 2