Table of Contents
Advertisement
Setting
Status
Pre-Shared Key
4.
Click [Save] when finished.
•
New settings are saved.
5.
Click [Cancel].
•
The IPsec page is displayed.
6.
Check [Use] in the IPsec column, select an encoding strength, and click
[Save].
Setting
IPsec
Encoding strength
•
Check the box to use this encryption method.
•
It is the key to use in the authentication of communications.
Enter the same pre-shared key as your PC.
•
Enter ASCII characters for the host name (see page 163).
But [Space], ["], ['], [&], [<] and [>] are not available.
Note
If the pre-shared key leaks to a third party, it may lead to illegal
access, private information leak or interference. To protect your
security and privacy, pay attention to the following points.
•
Make it known only to the specified people.
•
Set it as many characters as possible.
•
Change the password regularly.
•
Check the box to enable IPsec features. If you clear the
box, whole IPsec features will be invalid.
•
Encoding strength for IPsec can be selected. If you select
[Standard], DES or NULL is valid as an algorithm, and then
the data will become easier to be decrypted.
[For assistance, please call: 1-800-272-7033]
Description
Description
Operating Instructions
49
Advertisement
Table of Contents
