Getting Started; Making Settings Using The Setup Navigator Menu - Pioneer BDP 320 - Blu-Ray Disc Player Operating Instructions Manual

Chapter 3

Getting Started

Making settings using
the Setup Navigator
menu
Be sure to perform these settings when using the player
for the first time.
Caution
• Before turning on the power, check that the
connections between the player and other devices are
correct. Also, turn on the power of the devices
connected to the player before turning on the player's
power.
• When using a Pioneer Flat Panel TV or front projector
compatible with the KURO LINK function, set KURO
LINK to On on the connected device before turning on
the player's power.
• The screen in step 10 and test tones are output
simultaneously according to the settings in steps 4 to
7. Lower the volume of the devices connected with the
player.
Note
• When a Pioneer Flat Panel TV or front projector
compatible with the KURO LINK function is
connected to the player using an HDMI cable, the
player is automatically set to the optimum picture
quality for the connected device.
TOP MENU
HOME
MENU
1 Turn on the TV's power and switch the input.
See the TV's operating instructions for instructions on
operating the TV.
2 Turn on the player's power.
Press  STANDBY/ON.
Check that the Setup Navigator menu is displayed.
 If the Setup Navigator menu is not
displayed
 Press
HOME MENU to display the Home
Menu, select Initial Setup  Setup Navigator 
Start, then press ENTER.
TOOLS
ENTER
RETURN
3 Select the OSD language.
Use / to select, then press ENTER.
Setup Navigator
BD PLAYER
Please select the on-screen display language.
Audio, subtitle and BDMV/DVD-Video menu
language will also be set.
When a Pioneer Flat Panel TV that is compatible with
KURO LINK is connected to this player's HDMI OUT
terminal, language settings are imported from the
Pioneer Flat Panel TV's language settings before Setup
Navigator begins.
4 Select and set the video and audio output
terminals.
Select the actually connected video and audio output
terminals.
Use /// to select, then press ENTER.
Setting item Output terminal name
HDMI HDMI OUT
COMPONENT VIDEO OUT
VIDEO
HDMI HDMI OUT
DIGITAL AUDIO DIGITAL OUT
ANALOG AUDIO AUDIO OUT
Caution
• When HDMI is selected for Video, no video signals
are output from the COMPONENT VIDEO or VIDEO
output terminals.
• When COMPONENT or VIDEO is selected at Video,
no video signals are output from the HDMI OUT
terminal.
• The video and audio signals output from the set
output terminals are output synchronously (lip
synchronization).
• When COMPONENT or VIDEO is selected at Video,
no sound is output if HDMI is selected at Audio.
Follow the procedure below to redo the connections,
then select the proper connection at the setup
screen.
– When connecting using component video cables
or a video cable to watch the picture, connect to an
AV receiver or amplifier, or a TV using either analog
audio cables (7.1 channels or 2 channels), an
optical digital audio cable (page 17).
03
COMPONENT VIDEO
VIDEO
19
En