Yamaha MCX-P200 Getting Started page 2

(continued from the front side)
5.
Enter the security key used by the selected WiFi
Control
pad
router and then select "OK".
ZONE
MUSIC/
REMOTE
BACK HOME
VOLUME
MUTE
NETWORK MUSIC COMMANDER MCX-RC100
ê
ZONE
MUSIC/
REMOTE
BACK HOME
VOLUME
MUTE
NETWORK MUSIC COMMANDER MCX-RC100
Now the Music Commander is connected to your WiFi router.
6.
Make sure that no network cable is connected to the
Music Player (MCX-A300 or MCX-P200).
y
If you want to make a wired connection between the Music Player
and WiFi router, use a network cable to connect them and then turn
on the Music Player. In this case, you can skip the following steps.
7. ZONE
Music Commander:
8.
Music Player: While holding down MUTE, turn on the
Music Player.
Keep holding down MUTE until the WIRELESS LED lights in umber.
ê
Lights in umber
WIRELESS LAN
The "Client WiFi Setup" screen appears on the Music Commander.
It may take one or two minutes to detect the Music Player depending on
your network environment. If the display turns off during this process,
press ZONE to turn it on.
ZONE
MUSIC/
REMOTE
BACK HOME
VOLUME
MUTE
NETWORK MUSIC COMMANDER MCX-RC100
&
Perform step 9 within three minutes. If it failed, your Music Player
will exit the WiFi setup process. In this case, turn off the Music
Player and then perform step 8 again.
9. Yes Exit
Music Commander: →
ZONE
MUSIC/
REMOTE
BACK HOME
VOLUME
MUTE
NETWORK MUSIC COMMANDER MCX-RC100
ê
ZONE
MUSIC/
REMOTE
BACK HOME
VOLUME
MUTE
NETWORK MUSIC COMMANDER MCX-RC100
Light in green
WIRELESS LAN
&
If "WiFi Setup uncompleted" appears, turn off the Music Player and
then perform from step 8 again.
Now the Music Player is connected to your WiFi router.
4
Playback
Now you are ready to enjoy digital music distribution. As a system test,
follow the procedure below to start to listen to Internet Radio stations
using your MusicCAST2 products or Yamaha network receiver (RX-
V3900, etc) connected to your WiFi router. This unit uses the vTuner
Internet Radio station database service particularly customized for this
unit.
&
To output audio source at your receiver, you need to prepare the
receiver for playback (turning on power, selecting input source, etc).
For details, refer to the manual supplied with it.
1. ZONE
Music Commander:
2.
Control Select the device (zone) to which audio source is
pad
delivered.
ZONE
MUSIC/
REMOTE
BACK HOME
VOLUME
MUTE
NETWORK MUSIC COMMANDER MCX-RC100
ê
ZONE
MUSIC/
REMOTE
BACK HOME
VOLUME
MUTE
NETWORK MUSIC COMMANDER MCX-RC100
MUSIC/
3. REMOTE
→ Control [Net Radio]
pad
ZONE
MUSIC/
REMOTE
BACK HOME
VOLUME
MUTE
NETWORK MUSIC COMMANDER MCX-RC100
ê
ZONE
MUSIC/
REMOTE
BACK HOME
VOLUME
MUTE
NETWORK MUSIC COMMANDER MCX-RC100
4.
Select an Internet Radio station you want to listen
Control
pad
to.
ZONE
MUSIC/
REMOTE
BACK HOME
VOLUME
MUTE
NETWORK MUSIC COMMANDER MCX-RC100
ê
ZONE
MUSIC/
REMOTE
BACK HOME
VOLUME
MUTE
NETWORK MUSIC COMMANDER MCX-RC100
ê
ZONE
MUSIC/
REMOTE
BACK HOME
VOLUME
MUTE
NETWORK MUSIC COMMANDER MCX-RC100
5.
If playback starts, use the playback control keys to
operate desired functions.
Start playback
Pause (stop) playback
Adjust the volume level
VOLUME
MUTE
Turn on/off the audio mute
y
Playback control operations always work on the playback on the
device (zone) selected in the "Zone" screen (shown in step 2).
Playback screen
[ a ]
ZONE
MUSIC/
[ b ] REMOTE
[ c ]
BACK HOME
VOLUME
MUTE
NETWORK MUSIC COMMANDER MCX-RC100
[ a ] Playback status ( : Play, : Mute)
[ b ] Station logo (if available)
[ c ] Station name
6.
(to the previous menu screen)
BACK
ZONE
MUSIC/
REMOTE
BACK HOME
VOLUME
MUTE
NETWORK MUSIC COMMANDER MCX-RC100
ê
ZONE
MUSIC/
REMOTE
BACK HOME
VOLUME
MUTE
NETWORK MUSIC COMMANDER MCX-RC100
7.
(to the top menu screen)
HOME
ZONE
MUSIC/
REMOTE
BACK HOME
VOLUME
MUTE
NETWORK MUSIC COMMANDER MCX-RC100
ê
ZONE
MUSIC/
REMOTE
BACK HOME
VOLUME
MUTE
NETWORK MUSIC COMMANDER MCX-RC100
In case you need to turn off the Music
Commander
1. ZONE
Setup
Music Commander: →
2.
[Power Saving] - [Power Off] - [Yes]
Control
pad
ZONE
MUSIC/
REMOTE
BACK HOME
VOLUME
MUTE
NETWORK MUSIC COMMANDER MCX-RC100
y
To turn on the Music Commander, press and hold the control pad
for more than two seconds.