Output Meter - Yamaha CL1 Owner's Manual

3 4
5 6
3
Input patch
Click the CHANNEL field, and choose one of the following as the signal route that will be
patched to the input channel(s) of the currently selected GEQ module.
NONE
INS MIX 1–24
INS MTRX1–8
INS ST L, INS ST R, INS M(C)
The channel name is shown in the boxes immediately below.
4
Input meter
This indicates the level of the signal that is being input to the currently selected GEQ mod-
ule.
5
Output patch
Click the CHANNEL field, and choose one of the following as the signal route that will be
patched to the output channel(s) of the currently selected GEQ module.
NONE
INS MIX 1–24
INS MTRX1–8
INS ST L, INS ST R, INS M(C)
The channel name is shown in the boxes immediately below.
6

Output meter

This indicates the level of the signal that is being output from the currently selected GEQ
module.
No assignment
MIX channel 1–24 insert out
MATRIX channel 1–8 insert out
Insert-out of STEREO channel L/R or the MONO channel
No assignment
MIX channel 1–24 insert in
MATRIX channel 1–8 insert in
Insert-in of STEREO channel L/R or the MONO channel
56 CL Editor Owner's Manual