DeWalt DCG406 Original Instructions Manual
  1. Manuals
  2. Brands
  3. DeWalt Manuals
  4. Grinder
  5. XR Li-Ion DCG406
  6. Original instructions manual
DeWalt DCG406 Original Instructions Manual

DeWalt DCG406 Original Instructions Manual

Cordless small angle grinder
Hide thumbs Also See for DCG406:
Table of Contents

Advertisement

Quick Links

Download this manual
English (original instructions)
4
DCG406
DCG413

Advertisement

Table of Contents
loading

Related Manuals for DeWalt DCG406

Summary of Contents for DeWalt DCG406

  • Page 1 English (original instructions) DCG406 DCG413...
  • Page 2 Fig. A 90˚ 90˚ Copyright D WALT...
  • Page 3 Fig. B Fig. C Fig. D Fig. E Fig. F Fig. G...

  • Page 4: Machinery Directive

    English CORDLESS SMALL ANGLE GRINDER DCG406, DCG413 Congratulations! An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when You have chosen a D WALT tool. Years of experience, thorough it is running but not actually doing the job.

  • Page 5: Definitions: Safety Guidelines

    English Batteries Chargers/Charge Times (Minutes)*** DCB112/ DCB115/ Weight (kg) DCB104 DCB107 DCB113 DCB116 DCB117 DCB118 DCB132 DCB119 Cat # DCB1102 DCB1104 DCB546 18/54 6.0/2.0 1.08 DCB547/G 18/54 9.0/3.0 1.46 135* 110* 135* DCB548 18/54 12.0/4.0 1.46 DCB181 0.35 DCB182 0.61 60/40** 60/45** 60/40** 60/40** DCB183/B/G...

  • Page 6: Personal Safety

    English e ) When operating a power tool outdoors, use an extension f ) Keep cutting tools sharp and clean. Properly maintained cord suitable for outdoor use. Use of a cord suitable for outdoor cutting tools with sharp cutting edges are less likely to bind and use reduces the risk of electric shock.

  • Page 7: Kickback And Related Warnings

    English c ) Do not convert this power tool to operate in a way p ) Do not operate the power tool near flammable which is not specifically designed and specified by the tool materials. Sparks could ignite these materials. manufacturer. Such a conversion may result in a loss of control q ) Do not use accessories that require liquid coolants.

  • Page 8: Battery Type

    SAVE THESE INSTRUCTIONS Additional Safety Instructions for Wire Brushing Battery Type Operations The DCG406, DCG413 operates on an 18V battery pack. a ) Be aware that wire bristles are thrown by the brush even during ordinary operation. Do not overstress the wires by...
  • Page 9 English Intended Use These battery packs may be used: DCB181, DCB182, DCB183, DCB183B, DCB183G, DCB184, DCB184B, DCB184G, DCB185, Your cordless angle grinder has been designed for professional DCB187, DCB189, DCB546, DCB547, DCB547G, DCB548, cutting, grinding, sanding and wire brush applications. DCBP034, DCBP034G, DCBP518, DCBP518G. Refer to Technical DO nOT use grinding wheels other than centre depressed Data for more information.
  • Page 10 English any adjustments or removing/installing attachments or CAUTION: When using a Type B (grinding) wheel guard for accessories. An accidental start-up can cause injury. cutting-off operations with bonded abrasive wheels, there is an increased risk of exposure to emitted sparks and particles, as well WARNING: Use only D WALT battery packs and chargers.

  • Page 11: Operation

    English Flanges and Wheels NOTICE: Failure to properly seat the wheel before turning the tool on may result in damage to the tool or the wheel. Mounting Non-Hubbed Wheels (Fig. E) Mounting Wire Cup Brushes and Wire Wheels WARNING: Failure to properly seat the flange/ clamp nut/ (Fig. A) wheel could result in serious injury (or damage to the tool or wheel).

  • Page 12: Environmental Safety

    English • The gear becomes very hot during use. • Apply only a gentle pressure to the tool. Do not exert side pressure on the disc. • Always install the guard and appropriate disc or wheel. Do not use excessively worn disc or wheel. •...

  • Page 13: Maintenance

    English Cleaning and Disposal When cutting profiles and square bar, it is best to start at the smallest cross section. 1. All surfaces in the work area should be vacuumed and Rough Grinding thoroughly cleaned daily for the duration of the sanding project. Vacuum filter bags should be changed frequently.

  • Page 14: Protecting The Environment

    11500 20.0 115 13 11500 20.0 Additional information for guards and Accessories for DCg406, DCg413 ≤10 mm When using segmented diamond wheels, use only diamond wheels with a peripheral gap not greater than 10 mm and negative rake angle. DO NOT USE segmented diamond wheels with a peripheral gap greater than 10 mm and/or a positive rake angle.
  • Page 15 English DCG406, DCG413 Accessory and Guard Applications Application Accessory Type Accessory guard Assembly for Reference Surface Wheel Type 27 Grinding Type B (Grinding) Wheel Type 41 (1A) (metal) Type A (Closed cut off) Wheel Type 42 (27A) (metal) Type A (Closed cut off)
  • Page 16 English Application Accessory Type Accessory guard Assembly for Reference Flap Disc (Type 27 / Type 29) Type B (Grinding) Sanding Flexible Abrasive (e.g. sandpaper) Guard not required (supported by a flexible backing pad) Rubber backing pad and sanding clamp nut (included with rubber backing pad) available at additional cost from your local D WALT dealer or authorised D WALT service centre.
  • Page 20 Belgique et Tel: NL 32 15 47 37 63 www.dewalt.be Luxembourg België en Luxemburg Tel: FR 32 15 47 37 64 support@dewalt.be support@dewalt.be.fr Danmark Tel: 70 20 15 10 www.dewalt.dk support@dewalt.dk Deutschland Tel: 06126‑21‑0 www.dewalt.de support@dewalt.de Ελλάς Τηλ: 00302108981616 www.dewalt.gr support@dewalt.gr España Tel: 934 797 400 www.dewalt.es support@dewalt.es France Tel: 04 72 20 39 20 www.dewalt.fr support@dewalt.fr...

This manual is also suitable for:

Dcg413

Table of Contents