Handling and operation
Initial use
IMPORTANT
►
It is possible that oil drops may cause damage to furniture
surfaces. If necessary, place a cloth under the appliance.
♦
Place the appliance on a stable and level surface.
♦
Screw the salt crystal z clockwise firmly onto the mounting 9
on the base 8.
♦
Remove the attachment 1 from the base 8.
♦
Fill the water tank 3 with a maximum of 100 ml of clean tap
water using the measuring cup t provided. Note the maximum
filling level w, which is marked by a border.
♦
Add 2–4 drops of the desired oil to the water.
♦
Afterwards, place the attachment 1 back on the water tank 3.
♦
Connect the mains adapter r to the power socket.
Switching the appliance on/off and setting
the lighting
♦
Press the
mist production starts and the lighting is switched on.
♦
Press the
or to switch off the lighting.
♦
Press the
Aromatic mist production and the lighting will be switched off.
│
GB │ MT
■
32
button 7 to switch on the appliance. The aromatic
button 6 repeatedly to select the desired brightness
button 7 again to switch off the appliance.
SASL 12 A1