Philips Momentum 5000 User Manual page 8

3 Connecting to your PC
1
USB hub
2
Earphone-Hang
AC/DC power input
1
2 HDMI 1 input
HDMI 2 input
3
4 DisplayPort 1 input
DisplayPort 2 input
5
6 Audio Out
USB fast charger/USB downstream
7
8 USB fast charger/USB downstream
USB upstream
9
10 Kensington anti-theft lock
8
Fast Charger
2 3 4 5 6 7 9
10
1
USB A-B
Connect to PC
1. Connect the power cord to the back
of the monitor firmly.
2. Turn off your computer and unplug
its power cable.
3. Connect the monitor signal cable to
the video connector on the back of
your computer.
4. Plug the power cord of your
computer and your monitor into a
nearby outlet.
5. Turn on your computer and monitor.
If the monitor displays an image,
installation is complete.
USB hub
4
To comply with International energy
standards, the USB hub/ports of this
monitor are disabled during Sleep and
Power Off modes.
Connected USB devices will not work in
this state.
USB charging
5
This display has USB ports capable of
standard power output including some
with USB Charging function (identifiable
with power icon
ports to charge your Smart phone or
power your external HDD, for example.
The display must be powered ON at all
times to be able to use this function.
Note
If you Turn OFF your monitor via the
power switch at any given time, all the
USB ports will power OFF.
Warning
USB 2.4Ghz wireless devices, such
as, wireless mouse, keyboard, and
headphones, maybe have interference
by USB3.2 or higher version, which may
result in a decreased efficiency of the
radio transmission. Should this happen,
please try the following methods to help
6
). You can use these