Download Print this page

Bosch PVQ731F15E/20 Information For Use page 18

Induction hob with integrated ventilation system

Advertisement

en Cleaning and servicing
1.
ATTENTION!
Falling grease filters may damage the hob below.
Grip below the grease filter with one hand.
Remove the grease filter.
Fat may accumulate in the bottom of the con-
tainer. Hold the grease filter level to prevent
grease from dripping out.
Clean the grease filter.
2.
→ "Cleaning the grease filters manually",
Page 18
→ "Cleaning the grease filter in the dishwasher",
Page 18
If required, remove the odour filters or acoustics fil-
3.
ters and clean the appliance from the inside.
→ "Changing the odour filter or acoustics filter",
Page 16
If any objects get into the appliance, remove these
4.
objects and ensure that the supply to the overflow
container is not blocked.
5.
Wipe out the inside of the appliance with soapy wa-
ter and a dish cloth.
After cleaning, reinsert the dried grease filter.
6.
Cleaning the grease filters manually
Dismantle the grease filter.
1.
2.
Soak the grease filter in hot soapy water.
Use a brush to clean the grease filter.
3.
Do not use aggressive, acidic or alkaline cleaning
products.
Use special grease solvent for stubborn dirt. You
can purchase the grease solvent from the after-
sales service, through our online shop or in a spe-
cialist shop.
Rinse the grease filters thoroughly.
4.
Allow the grease filters to drain.
5.
18
Cleaning the grease filter in the dishwasher
For optimum cleaning results, disassemble the
1.
grease filter.
Place the individual components of the grease filter
2.
loosely in the dishwasher and do not jam them in.
Do not clean heavily soiled grease filters with table-
ware.
Do not use aggressive, acidic or alkaline cleaning
products.
Start the dishwasher.
3.
Select a maximum temperature setting of 70 °C.
Leave the grease filter to drain.
4.
20.7 Cleaning the overflow container
The overflow container collects liquids or objects that
come into the appliance from above.
Requirement: The appliance has cooled and the resid-
ual heat indicator has gone out.
Hold the overflow container with one hand and un-
1.
screw it with the other hand.
Hold the overflow container level to prevent liquid
from leaking out.
Empty the overflow container and rinse it out.
2.
If required, unscrew the screw and clean the over-
3.
flow container without the screw in the dishwasher.

Advertisement

loading

This manual is also suitable for:

Pvq f1 seriesPvq731f15e6 seriesPvq731f15e/35