Siemens HB978GN 1B Series User Manual And Installation Instructions page 20

en Basic settings
Basic settings
16 Basic settings
You can configure the basic settings for your appliance
to meet your needs.
16.1 Overview of the basic settings
Here you can find an overview of the basic settings
and factory settings. The basic settings depend on the
features of your appliance.
You can find more information about the individual ba-
sic settings on the display using ⁠ .
Basic settings Selection
Language See selection on the appliance
Home Connect Connect the oven to a mobile device
and remotely control it.
→ "Home Connect ", Page 21
Clock Time in 24-hour format
Date Date in the format DD.MM.YYYY
Display Selection
Brightness ¡ Levels 1, 2, 3, 4 and 5
Standby ¡ On for a limited time
screen
¡ On (this setting increases energy
consumption)
1
¡ Off
Clock ¡ Digital + date
¡ Digital
¡ Analogue + date
¡ Analogue
Alignment ¡ Align the display horizontally and
vertically
1 Factory setting (may vary according to model)
Tone Selection
Button tone ¡ On
¡ Off
Volume ¡ Levels 1, 2, 3, 4 and 5
Signal tone ¡ Very short duration
¡ Short duration
¡ Medium duration
¡ Long duration
1 Factory setting (may vary according to model)
Appliance set- Selection
tings
Fan run-on ¡ Minimum
time ¡ Recommended
¡ Long
¡ Very long
Factory setting (may vary according to model)
1
20
1
1
1
1
1
1
Appliance set- Selection
tings
Pull-out system ¡ Retrofitted (if 2 or 3 sets of pull-
out rails are fitted)
¡ Not retrofitted (if shelf supports
and a single set of pull-out rails
are fitted)
Lighting ¡ On when cooking and when
opening the door
¡ Only when the door is opened
¡ Always off
1 Factory setting (may vary according to model)
Personalisa- Selection
tion
Brand logo ¡ Display
¡ Do not display
Operation after ¡ Main menu
switch-on
¡ Types of heating
¡ Dishes
¡ Favourites
Elapsed cook- ¡ Display
ing time
¡ Do not display
1
Dishes ¡ All
¡ No pork
¡ Kosher only
1
Regional ¡ All
dishes ¡ European dishes
¡ British dishes
Childproof ¡ Button lock only
lock
¡ Door lock + keylock
¡ Keylock only
¡ Deactivated
Automatic ¡ On
rapid heating ¡ Off
Factory setting (may vary according to model)
1
Factory set- Selection
tings
Factory set- ¡ Restore
tings
Appliance in- ¡ Appliance information
formation
16.2 Changing the basic settings
Press in the status bar.
1.
Press the required basic settings area.
2.
Press the required basic setting.
3.
Press to select the required basic setting.
4.
a The change is applied directly for most basic set-
tings.
To change additional basic settings, use
5.
back and select a different basic setting.
To exit the basic settings, use
6.
main menu or switch off the appliance using
a The changes are saved.
1
1
1
1
1
1
1
1
to go back to the
to go
⁠ .