Table of Contents
Advertisement
Table 1. Features available on the front of the system
Item
Ports, panels, and
slots
1
Left control panel with
iDRAC reset button
2
Optical drive
3
Drive
4
Right control panel
5
Information tag
NOTE:
For more information, see the Dell EMCPowerEdgeR250 Technical Specifications on the product documentation
page.
Rear view of the system
Figure 4. Rear view of the system
Table 2. Rear view of the system
Item
Ports, panels, or slots
1
Serial port
2
Ethernet ports
3
PCIe expansion card slot 1 N/a
4
PCIe expansion card slot
2
5
Cabled power supply unit
8
PowerEdge R250 system overview
Icon
N/A
N/A
N/A
N/A
Icon
Description
N/a
Enables you to connect serail devices to the system.
The Ethernet ports that are integrated on the system board
provide network connectivity. These NIC ports can also be shared
with iDRAC when iDRAC network settings is set to shared mode.
Enables you to connect PCI Express expansion cards.
N/a
Enables you to connect PCI Express expansion cards.
Indicates the PSU.
Description
Contains the system health, and system ID.
NOTE:
To reset the iDRAC without changing any saved
settings press and hold the System Identification button for
at least 16 seconds.
One optional slim SATA DVD-ROM drive or DVD+/-RW drive.
Enables you to install drives that are supported on your system.
Contains the power button, USB port, iDRAC Direct micro port,
and the iDRAC Direct status LED.
The Information tag is a slide-out label panel that contains
system information such as Service Tag, NIC, MAC address,
and so on. If you have opted for the secure default access
to iDRAC, the Information tag also contains the iDRAC secure
default password.
Advertisement
Table of Contents
