Operation Schedule Setting - Hitachi ADVANCED COLOR PC-ARFG2-E1 Installation & Operation Manual

FUNCTION MENU
3 Press " " or " " to set each setting data for the selected
items.
After setting, press " " to confirm the settings and the
screen returns to the "Function Menu" screen.
When "Execute" is selected, press " " or " " to switch the
•
setting items as follows: "Not Used" ↔ "Once" ↔ "Everyday".

5.2 OPERATION SCHEDULE SETTING

This function is used to start or stop the unit operation at the set
time.
The temperature can be set during operation.
The operation schedule can be set up to 5 times a day on each
day of the week.


10 PMML0601 rev.0 - 07/2022
•
•
 Schedule day and time setting
 Schedule turn ON / OFF setting
 Schedule holiday setting
 
 Reset setting
When "ON Time" or "OFF Time" is selected, the setting time
can be adjusted in 30-minute increments by pressing " " or
" ". If you press and hold " " or " ", the number will
increase or decrease continuously.
" is selected, if you select "OK", the confirmation
When "
screen is displayed. Select "Yes" and press "OK" to reset the
"Simple Timer" setting and the screen returns to Step2.
If you select "Cancel", the screen still returns to Step2.
Setting"
The desired time and temperature can be set.
Up to 5 schedules per day can be set.
OFF Setting"
This function temporarily prevents the schedule from
running.
Schedule operation is not performed while the schedule is
disabled.
This setting is normally applied during long vacation.
"5.2.3 Schedule Holiday Setting"
Holidays can be set one week in advance.
On the days set as holidays, scheduled operation is not
performed for only one day.
It is used when there are irregular off days such as holidays.
"5.2.4 Reset the setting"
The schedule day / time setting and holiday setting are
deleted.
"5.2.1 Schedule Day and Time
"5.2.2 Schedule Turn ON/