Manual Network Switchover - Huawei IdeaShare User Manual

IdeaShare
User Guide
Figure 2-3 Projection code policy on the web interface
Step 2 Connect the computer or mobile phone to the network connected by the
endpoint, and check whether the network connection is normal.
----End

2.2 Manual Network Switchover

If the projection network or projection code policy is set to Auto but the projection
still fails, you can manually switch to the specified projection network or
projection code policy.
Configuring the Projection Network on the Large Screen
Step 1 On the home screen of the large screen, tap Projection to access the projection
guide screen, choose
to a proper projection network.
Step 2 Connect the computer or mobile phone to the network connected by the
endpoint.
----End
Configuring the Projection Network on the Web Interface
Step 1 Open the browser of the endpoint or computer, log in to the web interface (refer
to
Application > Wireless Projection > Parameter Configuration, and manually
switch to a proper projection network or projection code policy.
Step 2 Connect the computer or mobile phone to the network connected by the
endpoint.
----End
Issue 01 (2023-03-30)
Quick Configuration or Configuration Guide for the login process), choose
Copyright © Huawei Technologies Co., Ltd.
> Advanced > Projection Network, and manually switch
2 Configuration Operations
5