Figure 23. Installing the battery
Steps
1. Place the battery, along with the battery cable, in the slot on the palm-rest and keyboard assembly.
2. Align the screw holes on the battery to the screw holes on the palm-rest and keyboard assembly.
NOTE:
While installing the battery, insert the cut-outs on the battery into the hooks on the palm-rest and keyboard
assembly.
3. Replace the five screws (M2x3.5) that secure the battery to the palm-rest and keyboard assembly.
Next steps
1. Install the
base
cover.
2. Follow the procedure in
After working inside your
computer.
Removing and installing Field Replaceable Units (FRUs)
59