Cisco S196 Hardware Installation Manual page 7

Overview
Feature
Grounding holes
Locking faceplate
Unit identification button
Power button
Memory
RDIMMs
Internal component only; not
field-replaceable
Management ports
Proxy ports
Traffic ports
Remote power cycling
(RPC)
USB ports
SFP+ ports
Supported SFP+
Note
S196
Two threaded holes for dual-hole grounding lug
Use is optional; the supported AC power supplies have internal grounding, so
no additional chassis grounding is required.
Optional
On front panel
On front panel
16-GB RAM
One 16-GB SRx4
3200-MHz DIMM
(8 Gb)
One (M1)
M2 is not supported.
Two (P1 and P2)
Two (T1 and T2)
Accessed through the 1-Gb dedicated port
Two USB 3.0 Type A
No
—
Copper SFPs
are not
supported.
Cisco Secure Web Appliance S196, S396, S696, and S696F Hardware Installation Guide
S396 S696
64-GB RAM 128-GB RAM
Two 32-GB SRx4 Four 32-GB DRx4 3200-MHz DIMM
3200-MHz DIMM (8 Gb)
(16 Gb)
Features
S696F
Six fiber optic
SFP-10G-SR (10
Gb)
SFP-10G-SR
Note
has been
qualified by
Cisco. Use
only
Cisco-qualified
SFPs. We
recommend
you use
SFP-10G-SR
in the secure
web appliance
interface and
the
corresponding
switch
interface.
3