Advertisement
Connecting
an Antenna
to a Cable Box or VCR
Note:
The TV back panel and connections
shown
here are for reference
only and may vary by model,
CabMe Box
(Figure
3)
1.
Connect
the incoming
cable to ANT-A on the
TV back panel.
Connect
two coaxial
cables
as follows:
2.
One from LOOP-OUT
on the TV back panel to
IN on the cable box back panel.
3.
One from OUT on the cable box back panel to
ANT-B on the TV back panel.
Note:
If your cable box has separate
audio!video
outputs,
please see Composite
Video with
Audio or S-Video
with Audio,
page 16
(Figure 6).
Incoming
Cable
TV back
panel
(section
detail}
@
t Box
UPanes ct°
i
Figure 3. Connecting
the cable box.
Antenna
or Wall OutMet CabMe
(Figure 4)
1.
Connect
the incoming
cable to ANT-A on the TV
back panel.
Connect
two coaxial
cables
as follows:
2.
One from LOOP-OUT
on the TV back panel to
ANTENNA
IN on the VCR back panel.
3.
One from VCR back panel ANTENNA
OUT
to
ANT-B
on the TV back panel.
Note:
If your cable box has separate
audio/
video outputs,
please see Composite
Video with Audio or S-Video
with Audio,
page 16 (Figure 6).
TV back pane_ (section
detail)
Incomil_g Cable
..... :::ili ¸
_N
Antenna
OUT
Figure 4. Connecting
the VCR with antenna or wall
outlet cab/e.
Note:
For models
WS-48315,
WS-55315
and
WS-65315,
when the Energy Mode
is set
to Low, the VCR may not record
programs
when the TV is off.
Note:
For digital
came boxes, refer to your
Digital Cable Box owner's
guide for
instructions
on optimal
connections
to
this TV.
15
Advertisement
