Support For Devices That Do Not Feature Dante Output - Yamaha CL Series Supplementary Manual

Original notation Original notation
(Normal format) (Short format)
INS2 CH [n] IC2 [n]
INS2 MIX [n] IM2 [n]
INS2 MATRIX [n] IMT2 [n]
INS2 STEREO L ISTL2
INS2 STEREO R ISTR2
INS2 MONO (C) ISTMONO2
SUR MONITOR L SMON L
SUR MONITOR R SMON R
SUR MONITOR C SMON C
SUR MONITOR LFE SMON LFE
SUR MONITOR LS SMON LS
SUR MONITOR RS SMON RS
MONITOR MATRIX L MMT L
MONITOR MATRIX R MMT R
MONITOR MATRIX C MMT C
MONITOR MATRIX LFE MMT LFE
MONITOR MATRIX LS MMT LS
MONITOR MATRIX RS MMT RS
NOTE
• This notation is not case sensitive.
• This notation is recognized even if spaces are added between each word, or if the word order is
changed. However, the notation will not be recognized if a space is added in the middle of a word.
Additional notation when reading a CSV file
* Underlined words can be omitted.
* [n] indicates a number (such as a channel number).
Insert2 Input Channel [n]
Ins2 Input Channel [n]
Insert2 Mix Channel [n]
Ins2 Mix Channel [n]
Insert2 Matrix Channel [n]
Ins2 Matrix Channel [n]
Insert2 Stereo Output Left
Ins2 Stereo Output Left
Insert2 Stereo Output Right
Ins2 Stereo Output Right
Insert2 Mono (C)
Surround Monitor Left
Surround Monitor Right
Surround Monitor Center
Surround Monitor LFE
Surround Monitor Ls
Surround Monitor Rs
Monitor Matrix Left
Monitor Matrix Right
Monitor Matrix Center
Monitor Matrix LFE
Monitor Matrix Ls
Monitor Matrix Rs
Support for devices that do not feature
Dante output
Devices that do not feature Dante output, such as Shure AXT400, QLXD4, and ULXD4, can
now be controlled.
Selected Channel window (input channels)
The HA display appears as shown below.
 AXT400 display
When the receiver is on and connected via a ShowLink® remote control
The RF level is shown for two channels (A and B).
"TX.GAIN" is displayed.
When the receiver is on and not connected via a ShowLink® remote control
26

Support for devices that do not feature Dante output

V4.1 Supplementary Manual