Yamaha 01X Quick Reference page 2

Quick Reference
Stereo Playback (two-channel mix)
This setup lets you play back the main stereo output from the software mixer (DAW)
from the 01X.
1
Send the main stereo output of the sequencer to channels
Audio Sequencer
Computer
1 and 2 of the mLAN Audio Driver. (See step #8, p. 70.)
Software Audio Mixer
Ch. "mL2" (Layer 9-16)
Recording and Mixdown Using the 01X
This setup lets you use the 01X to mixdown the individual audio channels of the
sequencer (see application #2 at right) along with any live instruments/vocals input
to the 01X, and record everything to the sequencer. In this way, you can mixdown to
stereo two-track on your computer and master the recorded song in an audio editor.
Audio Sequencer Assign the output of the 01X Stereo Bus to mLAN. (p. 90)
Computer
Software Audio Mixer
OUT PATCH (mLAN Out Channel): ST-BUS = [1/2]
In this situation, direct recording of channels 1 and 2 (as in
"Direct Recording" on reverse side) is not possible.
mLAN Audio Driver Ch.1, 2
SEND3, 4
MIDI
Mic / Guitar
Synthesizer
Audio Playback from the Computer/Sequencer (DAW)
2
Set the mLAN 1 and 2 channels (Layer 9-16) to
stereo pair operation and adjust the level by
one of the faders.
1. Simultaneously press [SEL] of both mL1 and mL2.
2. Press knob 5 or 6 (RESET-BOTH). (p. 102)
01X
Pan
EQ, Dyn, Vol
Mix
EQ, Dyn, Vol
Ch. "mL1"
Effect 1, 2
Monitor
SEND3, 4
OUT PATCH
[ST-BUS] = D.OUT
<P.91>
STI1, 2
Effect 1, 2
Pan
Recorder
EQ, Dyn, Vol
(Digital connection)
EQ, Dyn, Vol
Mix
EQ, Dyn, Vol
EQ, Dyn, Vol
Playback of Individual Channels
In this setup, each audio channel on the software mixer (DAW) is sent to the corresponding
channel of the 01X.
Audio Sequencer
Computer
Software Audio Mixer
1
Assign the audio channels on the
sequencer to the channels of
the mLAN Audio Driver, from
channel 1 in order. (p. 70)
Monitor
2
Use the mLAN Stereo Inputs (Monitor In) for the sequencer's stereo output.
• By connecting the stereo output of the sequencer to the mLAN Stereo Inputs,
you can monitor the both the sequencer output and the 01X output, without
having to use 01X input channels for monitoring.
• The available channels of the mLAN Audio Driver depend on the settings of
the mLAN Auto Connector. (Guide, pp. 9, 20)
mLAN Stereo Input-R
Monitor A/B
(Mix Balance)
mLAN Stereo Input-L
Stereo L, R
Pan
EQ, Dyn, Vol
Ch. "mL8"
EQ, Dyn, Vol
Ch. "mL7"
EQ, Dyn, Vol
Ch. "mL6"
EQ, Dyn, Vol
Ch. "mL5"
Mix
EQ, Dyn, Vol
Ch. "mL4"
EQ, Dyn, Vol
Ch. "mL3"
EQ, Dyn, Vol
Ch. "mL2"
EQ, Dyn, Vol
Ch. "mL1"
Effect 1, 2
SEND3, 4 STI1, 2 Fader
The actual output settings differ depending on the sequencer (DAW).
For example:
• Each mixer channel on the sequencer is assignable to one of the mLAN channels.
• Each mixer channel on the sequencer is assigned to a bus, and the bus is
assignable to one of the mLAN channels.
WC96730 311POCP38.2-01A0 Printed in Japan
01X
Monitor