Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Sony ZRA-T1
Summary of Contents for Sony ZRA-T1
- Page 1 5-057-425-11 (1) Optical Transmitter Optical Receiver Operating Instructions Before operating the unit, please read this manual and the supplied Before Using This Unit document thoroughly and retain it for future reference. ZRA-T1 ZRA-R1 © 2023 Sony Corporation...
-
Page 2: Table Of Contents
Manual Structure ........3 Condensation ..........3 Overview ............. 4 System Configuration Diagram ....4 Parts Identification ........5 Optical Transmitter ZRA-T1 ......5 Optical Receiver ZRA-R1 ......6 Usage of this product ........7 Error Codes ..........8 Cleaning and Storage ........8 Trademarks... -
Page 3: Please Read This First
PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY OTHER REASON WHATSOEVER. • SONY WILL NOT BE LIABLE FOR CLAIMS OF ANY KIND MADE BY USERS OF THIS UNIT OR MADE BY THIRD PARTIES. • SONY WILL NOT BE LIABLE FOR THE... -
Page 4: Overview
Overview This product is a converter used to extend the distance between the Display Controller and Display Cabinet with the optical cable. It can be extended up to 300 m by using the SFP+ transceiver module (not supplied) and optical fiber cable (not supplied). -
Page 5: Parts Identification
SFP+ transceiver module. Note Contact your local Sony representative for The INPUT indicator and OUTPUT indicator blink other SFP+ transceiver modules. in red for about 5 seconds shortly after turning • OTM-10GSR1 (Sony Corporation) -
Page 6: Optical Receiver Zra-R1
Display Cabinet. The connectors 1 to 3 correspond to the OUTPUT indicator INPUT connectors 1 to 3 of ZRA-T1 Indicates the status of RJ45 output respectively. connectors 1 to 3. Up to 3 cables can be connected to these Lights up regardless of whether it is connectors. -
Page 7: Usage Of This Product
Category 7 cable. (Cable length: within 10 m) Connect the SFP+/OM3 cable. Attach the SFP+ transceiver module to the SFP+ output connector on ZRA-T1 and the SFP+ input connector on ZRA-R1. Connect SFP+ transceiver modules to each other with the optical fiber cable. -
Page 8: Error Codes
Category Description Solution Temperature Temperature in the device Check the device installation environment. If the problem persists, contact your local Sony representative. Communication Communication (Video Input Signal/ Check that the LAN cable is properly RS485) connected. If the problem persists, contact your local Sony representative. - Page 9 Sony Corporation...