Table of Contents
Advertisement
6.
Color Space: You can choose sRGB, Rec.709, HDR, EBU, DCI, SMPTE-C and
General.
-----------------------------------------------------------------------------------------------------------
Note: Color Space = HDR to correspond Modes is HDR, Other Color Space the
Modes=Standard.
•
CIE 1931 positive and negative error of 0.05, ("HDR" according to current Panel
to fine-tune).
•
Color Space = HDR, the Modes = HDR, Picture page HDR = Auto.
•
The signal content is SDR, the brightness can to adjustment, but content is HDR
the brightness is fixed at 100 and gray out unavailable.
•
Modes = (Action/Racing/Sports/User/Standard/ECO/Graphics) is selected; the
color space is auto set to "General".
•
Color Space = (sRGB/Rec.709/HDR/EBU/DCI/SMPTE-C), If to adjust the
parameter the Modes will not jump to User mode, but the Color Space =
"General" except.
•
Color Space = (sRGB/Rec.709/HDR/EBU/DCI/SMPTE-C), 6-Axis Hue &
Saturate is gray out and unavailable.
•
Color Space = (sRGB/Rec.709/HDR/EBU/DCI/SMPTE-C), Grayscale Mode is
gray out and unavailable.
7.
Gamma: allows you to adjust the luminance tone. The default value is 2.2 (standard
value for windows). Adjust range are 1.8, 2.0, 2.2, 2.4 or 2.6.
8.
Color temperature: You can choose color temperature as Warm, Normal, Cool, Low
Blue light or User.
•
Warm: Increases the color temperature. The screen appears warmer with a red/
yellow tint. This is the default preset mode.
•
Normal: Loads the monitor's normal color settings.
•
Cool: Decreases the color temperature. The screenappears cooler with a blue
tint.
•
Low Blue light: Decreases the level of low blue light emitted from the screen to
•
User: Allows you to manually adjust the color settings.
9.
Grayscale Mode:To choose Grayscale mode.
10. 6-axis Hue: Adjust the red, green, blue, yellow, magenta and cyan hue.
11. 6-axis Saturate: Adjust the red, green, blue, yellow, magenta and cyan saturation.
make viewing more comfortable for your eyes.
Advertisement
Table of Contents
