Seek Mode - Kenwood DNX7120 Instruction Manual

• For the b asic method ofreceiver button operations, refer to<Basic Operations> (page 10).
• Set the r emote controller mode switch to"AUD" mode before starting operation, refer to<Remote Contro%r mode switch>
(page
90).
Switches to the source control screen to use
various functions.
......... "X /" .........
X /
1/2, or Radio Text.
i5 Turns the Traffic Information function On or
Offi
See <Traffic Information>, (page 31).
i6 Switches to the FM1/2/3 band.
17 Switches to the AM band.
18 Tunes in a station.
Use the <Seek Mode> (page 28) to change
the frequency switching.
J9J Switches the button display.
i10 Turns the CRSC function On or Of[ (Only
when receiving the FM broadcast)
if1 Selects the Auto Memory mode.
(Refer to page 28 for the <Auto Memory>)
ii2 Switches the Seek mode.
(Refer to page 28 for the <Seek Mode>)
j13 Switches the number of lines displayed in
the Information Display.
ji4 Displays the Hands Free screen. (page 51)
i15 When _ to _ buttons appear, you
can recall the stations on memory.
For memory of broadcasting stations, refer
to <Auto Memory> (page 28) or <Manual
Memory> (page 29).
i16 Sets a name to the station. See <Set Station
Name> (page 30).
ii7 Searches station by program type. See
<Search for Program Type> (page 31).
i18 Lists and selects memorized station. See
<Preset Select> (page 29).
i19 Displays RadioText screen. See <Radio
Text> (page 30).
i20 Displays the external device control
screen. See <External Device Power Supply
Control> (page 47).
ill
Band display
j2 Preset number
is] Frequency display
j4 Radio station information display.
Selects the Program Service Name,Title &
Artist name, Station Name, Category Name
English @ 27