Password Settings - GE MDS TransNEXT NET9L Technical Manual

3.3.9.4 dlink.connection_timeout [0-65535]
This attribute specifies the connection timeout in milliseconds for TCP dlink operation. The timeout is
the maximum time the connection can remain idle before dropping the connection. 0 is reserved as a
special value to mean do not apply a connection timeout. Default is 0.
3.3.9.5 dlink.tcp_port [0-65000]
This attribute specifies the TCP port for the Dlink TCP server to use. It is not used when dlink.tcp_access
is "off". The default is 30020.

Password settings

The Password attribute group contains settings associated with password management. By default,
TransNEXT units ship with a unique 10-character password per device. The password policy allows
customer control of what password choices are acceptable.
>cfg get password
{
min_chars: 1,
max_chars: 64,
min_lower_case: 1,
min_capital_letters: 0,
min_numbers: 0,
min_non_alpha_numeric: 0,
permit_username: "on"
}
NOTE
For best security practice GE MDS recommends changing the password prior to deployment.
Passwords are changed with the password command.
>password help
password <user>
<user> [admin, tech, oper]
3.3.10.1 password.min_chars [0-255]
This item specifies the minimum number of characters for a new password. Default is 10.
3.3.10.2 password.max_chars [0-255]
This item specifies the maximum number of characters for a new password. Default is 64.
3.3.10.3 password.min_lower_case [0-255]
This item specifies the minimum number of lower-case characters for a new password. Default is 1.
3.3.10.4 password.min_capital_letters [0-255]
This item specifies the minimum number of capital letters for a new password. Default is 1.
3.3.10.5 password.min_numbers [0-255]
This item specifies the minimum number of numbers (0-9) for a new password. Default is 1.
MDS 05-7280A01, Rev. A
Change password for specified user
MDS TransNEXT Technical Manual 43