Pioneer CT-1060W Service Manual page 56

CT-1IOGOW, CT-S77W
4. Copy
Playback sound from deck I can be recorded in
deck II by this copy function at two different
speeds — normal speed and double speed.
During double speed copying, the x1 output pin
is at ""H" level, and the x2 output pin is at "L"
level.
COPY and SPEED switch inputs can be received
at any time. When not in normal or double speed
copy mode nor in the special modes indicated in
Fig. 12-5,
COPY indicators I and III come on ("'H" out-
put) when the COPY switch is switched on, and
COPY indicator II comes on (''H"' output) when
the SPEED switch (high speed) is switched on.
Deck II detector switches Indicator
a
COPY IND PLAY
PLAY | FAST | REC
[ |
(i)
| (mh)
[ino ay
Switched on and off sequentially
Normal speed
copy mode
Double speed
copy mode Switched on and off sequentially
1 on and off on and off
Special mode Blinking O | Blinking
Special mode Blinking | Blinking Blinking
2 on and off| on and off | on and off
Switch on: "L" input
*1) When HB, SW and PLAY SW are not on together.
Sequential on/off switching
al Tax3
COPY
IND (1)
The indicator on time Ta is
800 ms during normal speed copy mode
400 ms during double speed copy mode
COPY IND (iI)
The intervening time Tb is
800 ms during normal speed copy mode
COPY IND (1) Tb 400 ms during double speed copy mode
Fig. 12-5 PD4061 Input/output table at COPY mode
76