Table of Contents
Advertisement
16.2 Adjustment of the Needle Mark Angle
The angle of the needle mark can be adjusted within the specified range depending on
the transducer and biopsy adaptor used.
* The needle mark cannot be changed (angle fixed) for some biopsy adapters.
(1) Select [G Angle] in the menu and press
([G Angle] is automatically set to ON when [G Display] is set to ON. This step is
not required unless [G Angle] has been set to OFF intentionally.)
(2) The angle of the needle mark changes as the multifunctional dial is turned.
(3) Select [G Angle] from the menu and press
16.3 Display/Hiding of Biopsy Range Marks
Select [Range Disp] in the menu and press
The biopsy range marks are toggled between displayed and hidden.
16.4 Selection of the Biopsy Guide Size
(1) Select [G Size] in the menu.
(2) Select the guide size in the pull-down menu and press
The size of the dots that make up the needle mark is changed.
16.5 Selection of the Biopsy Adaptor
Multiple biopsy adaptors may be selectable depending on the type of transducer used.
(1) Select [Adapt Sel] in the menu and press
(2) Select an item from the dialog and press [OK].
.
SET
SET
.
SET
. A dialog is displayed.
SET
No. 2B730-973EN*D
16-4
. The needle mark angle is fixed.
.
SET
*
Advertisement
Table of Contents
