Huawei DBS3900 Installation Manual page 44

DBS3900 (Ver.B)
Installation Guide
Procedure
Step 1 Determine the position for installing a base.
1.
2.
3.
Step 2 Drill holes at the anchor points, and then install the expansion bolt assemblies, as shown in
Figure
Issue 06 (2011-09-15)
NOTE
The type of cabinet in
According to the engineering drawing and installation clearance requirements, determine
the position for installing a cabinet.
On the concrete pad, mark holes to determine the installation position of the base, as shown
in Figure 6-3.
Figure 6-3 Installation holes of the base
After marking all the holes, use the measuring tape to check whether the distances between
the holes are accurate.
6-4.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Outdoor Scenario with AC Power Supply (BBU Installed
Figure 6-2 can be APM30H, TMC11H, or IBBS200D.
in an APM30H)
31