Yamaha PASC4 Owner's Manual page 81

TIP
Power is supplied automatically when an external de-
vice is connected with the USB cable.
No power is supplied if the remaining capacity of the
Battery Pack is low.
The power supply of the vehicle will go off and power
supplied by the USB connection will also stop if the ve-
hicle is not operated for 5 minutes.
It is normal to become somewhat warm during power
supply.
Communication with Bluetooth low energy
technology
The wireless communication device corresponding to the
CSCP, CPP, or YEP1.0 profiles can provide the communi-
cation via Bluetooth low energy technology.
1.
Also confirm that they are in accordance with the con-
nection settings of your wireless communication de-
vice.
2.
your wireless communication device.
For more information, see the instruction manual of the
wireless communication device.
* is a combination of irregular alphanumeric char-
acters.
TIP
Keep the distance between the communication unit
and wireless communication device within 3 ft (1 m).
The maximum communication distance of this wireless
communication device is 3 ft (1 m).
If the wireless communication device is kept in a bag,
etc., the actual communication distance might be shorter.
Do not use the wireless communication device in plac-
es with magnetic fields, static electricity, or electromag-
netic interference.
If the wireless communication device is used near
transmitters, broadcasting stations or the following type
of equipment, wireless communication may not be pos-
sible.
Microwave ovens
Digital cordless phones
Wireless communication devices
Near other wireless communication device using the
2.4 GHz band.
Do not cover the communication unit with objects such
as aluminum sheets that block the radio waves. Other-
wise, wireless communication may not be possible.
For the output power level of each profile, see the
77
-