GE Voluson S6 Basic User Manual page 246

Hide thumbs Also See for Voluson S6:

9.2.4.2 Translation

Reference image e.g., A: X-axis: A ´ C Y-axis: A ´ B Z-axis: B ´ C

Before performing a rotation, position the center of rotation in the area of the image that

you want to keep.

The translation allows a displacement of the center of rotation along the intersection lines of

the sectional planes A, B and C. The displacement of the center of rotation leads to the display

of parallel sectional images.

To perform parallel slicing of images rotate the [Parallel Shift] rotary control.

Turn the [Parallel Shift] rotary control clockwise:

Reference image: A

The sectional plane migrates from the front to the rear through the volume

Reference image: B

The sectional plane migrates from the left to the right through the volume

Reference image: C

The sectional plane migrates from the top to the bottom through the volume

Important note:

The terms "front, left, top" etc., do not refer to the patient, but serve for explanation.

Parallel movement of the reference image will display the new intersection lines with the non-

reference images. The sectional planes of the non-reference images are not altered.

Axis positioning of the center of rotation in the reference image:

Voluson® S6/S8 Basic User Manual

5433669-100 Revision 4

Show Quick Links

Chapters