Table Of Contents; Safety Symbols - Bosch GRG18V-3600C Operating/Safety Instructions Manual

The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.
Safety Symbols . . . . . . . . . . . . . . . . . . . . 2
General Power Tool Safety Warnings . . . . 3
Safety Rules for Cordless Rivet Tool. . . . . 5
Additional Safety Warnings . . . . . . . . . . . 6
FCC Caution . . . . . . . . . . . . . . . . . . . . . . 6
Industry Canada . . . . . . . . . . . . . . . . . . . 6
Specifications . . . . . . . . . . . . . . . . . . . . . 7
Intended Use . . . . . . . . . . . . . . . . . . . . . . 7
Symbols. . . . . . . . . . . . . . . . . . . . . . . . . . 8
Getting to Know Your Product . . . . . . . . 10
Assembly . . . . . . . . . . . . . . . . . . . . . . . . 11
Inserting and Releasing Battery
Pack . . . . . . . . . . . . . . . . . . . . . . 11
Changing the Nosepiece . . . . . . . . . . 11
Empty the Mandrel Container . . . . . . 11
Operation . . . . . . . . . . . . . . . . . . . . . . . 12
Suitable Blind Rivet/Nosepiece
Combinations . . . . . . . . . . . . . . . 12
Setting a Blind Rivet. . . . . . . . . . . . . 13
User Interface . . . . . . . . . . . . . . . . . . 14
Working Advice . . . . . . . . . . . . . . . . . 15
LED Worklight . . . . . . . . . . . . . . . . . 15
Suspension Device . . . . . . . . . . . . . . 15
Belt clip . . . . . . . . . . . . . . . . . . . . . . 15
160992A8AK GRG18V-3600C 20230616.indd 2 160992A8AK GRG18V-3600C 20230616.indd 2

Safety Symbols

This is the safety alert symbol. It is used to alert you to po-
tential personal injury hazards. Obey all safety messages that
follow this symbol to avoid possible injury or death.
DANGER indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.

Table of Contents

Connectivity. . . . . . . . . . . . . . . . . . . . . . 16
Maintenance . . . . . . . . . . . . . . . . . . . . . 17
Accessories . . . . . . . . . . . . . . . . . . . . . . 18
-2-
Connectivity functions . . . . . . . . . . . 16
Functions in Conjunction with
the Power Tool . . . . . . . . . . . . . . 16
Cleaning or Replacing the Jaws . . . . 17
Service . . . . . . . . . . . . . . . . . . . . . . . 18
Batteries. . . . . . . . . . . . . . . . . . . . . . 18
Replacing the Built-in Coin Cell . . . . 18
Tool Lubrication . . . . . . . . . . . . . . . . 18
Motors . . . . . . . . . . . . . . . . . . . . . . . 18
Cleaning. . . . . . . . . . . . . . . . . . . . . . 18
Accessory Storage & Maintenance. . . 18
6/16/2023 7:50:08 PM 6/16/2023 7:50:08 PM