NEC N8100-2834F Maintenance Manual page 126

Chapter 3 Appendix
i40ea
27
When installing an OS, starting system,
or applying Standard Program Package
i40ea
27
When installing an OS, starting system,
or applying Standard Program Package
volmgr
46
When installing an OS
qebdrv
56
When applying Standard Program
Package
Microsoft-Windows-Time-
Service
134
When installing an OS, starting system,
or applying Starter Pack
SNMP
1500
When installing an OS
Service Control Manager
7023
When installing an OS
Service Control Manager
7023
When starting an OS
Service Control Manager
7023
When starting an OS or shutting down
an OS
Service Control Manager
7030
When installing an OS
Microsoft-Windows-
DistributedCOM
10010
When installing an OS
126
HPE Ethernet 10Gb 2-port 562SFP+ Adapter #xx
Warning
Network link is disconnected.
This event does not affect system operation.
HPE Ethernet 10Gb 562SFP+ Adapter #xx
Warning
Network link is disconnected.
This event does not affect system operation.
Error Crash dump initialization failed!
Go to the following Microsoft website for details.
http://support.microsoft.com/kb/2756313
NTPNP_PCIxxxx: RDMA has been implicitly disabled due to RDMA
interface incompatibility between NDIS Miniport (ver x.xx.xx.x) and VBD
Warning
(ver x.xx.x.x) drivers. VBD driver upgrade is required.
* The value of x varies depending on your environment.
This event does not affect system operation.
NtpClient was unable to set a manual peer to use as a time source
because of a DNS resolution error on 'time.windows.com,0x9'.
Warning
NtpClient will try again in 15 minutes and double the reattempt interval
thereafter.
If it is not registered after connecting to the Internet, there is no problem
with system operation.
The SNMP Service encountered an error while accessing the registry
key
Error
[SYSTEM\CurrentControlSet\Services\SNMP\Parameters\TrapConfigur
ation].
If this event is logged only when SNMP is enabled and does not occur
repeatedly, there is no problem with system operation. Go to the
following Microsoft website for details.
http://support.microsoft.com/kb/2002303/
The Network List Service terminated with the following error:
Error
The device is not ready.
If this event is logged only when installing an OS and does not occur
repeatedly, there is no problem in system operation.
The IP Helper service terminated with the following error:
Error The service cannot be started, either because it is disabled or because
there are no enabled devices associated with it.
If this event is logged only when installing an OS and does not occur
repeatedly, there is no problem in system operation.
The WMI Performance Adapter service terminated with the following
Error
error: The error cannot be identified.
Ignore this error because there is no impact on the system.
Printer Extensions and Notifications service is marked as interactive
Error service. However, the system is not allowed to use interactive service.
Thus, this service might not work correctly.
If this event is logged only when installing an OS and does not occur
repeatedly, there is no problem in system operation.
The server {xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx} did not register in
Error
DCOM within the necessary timeout period.
For details, refer to the following website:
http://support.microsoft.com/kb/956479/ja
Express5800/R120h-1M, R120h-2M (3rd-Gen) Maintenance Guide
2. List of Windows Event Logs
(Japanese only)