Data Acquisition Application Starting (Online) Flow; User Registration (At Initial Starting) - Fujitsu AIRSTAGE UTY-ASGX Manual

3-1

Data acquisition application starting (online) flow

This section describes procedures for online work when "Online work" is selected from the
Menu.
3-2-1

User registration (at initial starting)

To start the Data acquisition application, the user must be verified by user ID and password.
If the user is not registered, user registration processing is started. User registration, change,
and deletion can also be performed at (-12 Others screen (Setting).
User ID input field
Input the user ID. (Up to 20 alphanumeric characters) (*1)
Password input field
Input the password. (Up to 20 alphanumeric characters) (*1)
Password confirmation input field
Input the password again for confirmation. (Up to 20 alphanumeric characters) (*2)
OK button
When the
saved.
The opening screen is displayed, and operation advances
to site data selection processing.
Cancel button
When the
ends.
Note *1 When the user ID and password input fields are not inputted, an error mes-
sage is displayed.
*2 When the password and password confirmation input contents are different,
an error message is displayed.
Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
button is clicked, the inputted data is
button is clicked, user registration stops and the Service Tool
11